07 Nissan Murano Oil Capacity

The 2007 Nissan Murano, a popular crossover SUV, is known for its blend of comfort, style, and reliability. A crucial aspect of maintaining its longevity and performance lies in proper engine lubrication. Understanding the correct oil capacity for your 2007 Murano is paramount for ensuring optimal engine health. This article dives deep into the oil capacity specifics, oil types, and essential maintenance procedures for this vehicle.

Understanding the 2007 Nissan Murano Engine Options

The 2007 Nissan Murano primarily came with one engine option: the VQ35DE, a 3.5-liter V6 engine. This engine is renowned for its smooth power delivery and robust performance. It's a naturally aspirated (non-turbocharged) gasoline engine featuring dual overhead camshafts (DOHC) and variable valve timing (VVT), contributing to its efficiency and responsiveness.

2007 Nissan Murano Oil Capacity: The Definitive Answer

For the 2007 Nissan Murano equipped with the VQ35DE engine, the oil capacity is 4.75 quarts (4.5 liters) when performing an oil change with a filter replacement. It's crucial to always replace the oil filter whenever you change the engine oil. A clean oil filter ensures optimal filtration and prevents contaminants from circulating within the engine.

Important Note: Always double-check your owner's manual for the most accurate and up-to-date information regarding your specific vehicle's oil capacity. While this article provides a general guideline, variations may exist based on manufacturing specifics or modifications.

Selecting the Right Engine Oil for Your 2007 Murano

Choosing the correct engine oil is just as important as knowing the right quantity. Nissan recommends using a high-quality SAE 5W-30 engine oil for the 2007 Murano. The "5W" indicates the oil's viscosity at low temperatures (winter), while "30" represents its viscosity at higher operating temperatures. This multi-grade oil provides adequate lubrication across a wide range of temperatures, ensuring reliable engine performance in various climates.

You have several options when it comes to choosing your oil:

Conventional Oil: This is the most basic and affordable type of engine oil. It's suitable for general use but may require more frequent changes compared to synthetic options.
Synthetic Blend Oil: A mix of conventional and synthetic oils, offering better performance and protection than conventional oil alone. It's a good middle-ground option.
Full Synthetic Oil: The premium choice, providing superior engine protection, improved fuel economy, and extended oil change intervals. Full synthetic oils are formulated with advanced additives that enhance their performance characteristics.
High Mileage Oil: Specifically formulated for vehicles with higher mileage (typically over 75,000 miles), these oils contain additives that help to condition seals and prevent leaks, which are common in older engines.

For a 2007 Nissan Murano, especially one with higher mileage, a synthetic blend or high mileage oil in the recommended 5W-30 viscosity is generally the best choice. This provides a good balance of protection and cost-effectiveness. If you prioritize maximum engine protection and are willing to spend more, a full synthetic oil is an excellent option.

Step-by-Step Oil Change Procedure for the 2007 Murano

Performing a regular oil change is crucial for maintaining your Murano's engine health. Here's a step-by-step guide:

Gather Your Supplies: You'll need the correct amount of engine oil (4.75 quarts of 5W-30), a new oil filter (Nissan part number 15208-9F600 or equivalent), an oil filter wrench, a wrench for the oil drain plug (typically 14mm), a drain pan, a funnel, gloves, and safety glasses.
Warm Up the Engine: Run the engine for a few minutes to warm the oil, making it flow more easily.
Secure the Vehicle: Park the Murano on a level surface and engage the parking brake. Use jack stands to safely support the vehicle after lifting it with a jack. Never work under a vehicle supported only by a jack.
Locate the Oil Drain Plug: The oil drain plug is located on the bottom of the oil pan. Place the drain pan beneath the plug.
Remove the Drain Plug: Using the correct wrench, carefully loosen and remove the drain plug. Allow the old oil to drain completely into the pan. Be careful, as the oil will be hot.
Replace the Oil Filter: Locate the oil filter (typically near the front of the engine). Use the oil filter wrench to loosen and remove the old filter. Before installing the new filter, lightly lubricate the rubber gasket with fresh engine oil. Screw the new filter on by hand until the gasket makes contact, then tighten it another 1/2 to 3/4 turn.
Reinstall the Drain Plug: Once the oil has completely drained, clean the drain plug and install a new crush washer (if applicable). Tighten the drain plug to the manufacturer's specified torque (typically around 25-30 ft-lbs). Do not overtighten!
Add New Oil: Using a funnel, pour 4.5 quarts of new oil into the engine.
Check the Oil Level: After adding the oil, check the dipstick to ensure the oil level is within the "Min" and "Max" marks. Add more oil if needed to reach the correct level.
Start the Engine: Start the engine and let it run for a few minutes. Check for any leaks around the drain plug and oil filter.
Recheck the Oil Level: After the engine has run for a few minutes, turn it off and let it sit for a few minutes. Recheck the oil level and add more oil if necessary.
Dispose of Used Oil Properly: Take the used oil and filter to a recycling center or auto parts store for proper disposal.

Oil Change Intervals: Maintaining Optimal Engine Health

The recommended oil change interval for the 2007 Nissan Murano is typically every 5,000 to 7,500 miles when using synthetic blend or full synthetic oil. If you're using conventional oil, you may need to change it more frequently, around every 3,000 to 5,000 miles. Factors like driving conditions (frequent stop-and-go traffic, towing, or extreme temperatures) can also affect the oil change interval. In such cases, more frequent oil changes are recommended.

Consult your owner's manual for specific recommendations based on your driving habits. Additionally, pay attention to the oil life monitoring system (if equipped) which can provide more precise guidance on when to change your oil.

Troubleshooting Common Oil-Related Issues

Several issues can arise related to engine oil. Here are a few common problems and potential solutions:

Low Oil Pressure: This can be caused by low oil level, a faulty oil pump, a clogged oil filter, or worn engine bearings. Check the oil level first, and if it's low, add oil. If the problem persists, consult a mechanic for further diagnosis.
Oil Leaks: Common leak points include the valve cover gaskets, oil pan gasket, crankshaft seals, and camshaft seals. Identifying and repairing the source of the leak is essential to prevent further engine damage.
Excessive Oil Consumption: This can be caused by worn piston rings, valve stem seals, or internal engine damage. Using a higher viscosity oil or adding an oil additive designed to reduce oil consumption may help, but ultimately, engine repairs may be necessary.
Milky or Foamy Oil: This indicates the presence of coolant in the oil, which can be caused by a blown head gasket or a cracked cylinder head. This is a serious issue that requires immediate attention from a qualified mechanic.

Conclusion

Properly maintaining the engine oil in your 2007 Nissan Murano is essential for its longevity and performance. Knowing the correct oil capacity (4.75 quarts with filter change), using the recommended SAE 5W-30 engine oil, and adhering to a regular oil change schedule will help ensure that your Murano continues to run smoothly for years to come. Remember to always consult your owner's manual for specific recommendations and address any oil-related issues promptly to prevent potential engine damage. By following these guidelines, you can keep your 2007 Murano running reliably and efficiently.