Oil Filter For 2021 Nissan Rogue

So, you're looking for information on the oil filter for your 2021 Nissan Rogue? You've come to the right place. Changing your oil regularly is one of the most important things you can do to keep your engine running smoothly and extend its lifespan. And, of course, the oil filter plays a critical role in that process.

Understanding the Importance of the Right Oil Filter

Let's face it, oil filters aren't exactly glamorous. But they're essential. Their job is to trap contaminants like dirt, metal shavings, and combustion byproducts that can circulate in your engine oil. Without a good filter, these particles would act like sandpaper, wearing down internal engine components and leading to costly repairs down the road.

Using the correct oil filter for your 2021 Nissan Rogue is absolutely crucial. A filter designed for a different vehicle might have the wrong thread size, gasket size, or internal pressure relief valve setting. This can lead to leaks, reduced oil pressure, or even engine damage. That's why it's always best to stick with a filter that's specifically recommended for your vehicle.

Identifying the Correct Oil Filter for Your 2021 Rogue

The 2021 Nissan Rogue, equipped with the 2.5L 4-cylinder engine, typically uses a spin-on type oil filter. While there can be slight variations depending on the specific trim and region, the most common oil filter part number you'll find is Nissan part number 15208-65F0E. You might also see it referenced as a Fram PH7317 or equivalent from other reputable brands like Mobil 1, Bosch, K&N, and Wix.

Always double-check the part number against your owner's manual or a reliable online parts catalog before purchasing. Many auto parts stores will also allow you to enter your vehicle information to verify compatibility. When in doubt, consult with a trusted mechanic or your local Nissan dealer.

Common Issues and Symptoms Related to Oil Filters

Several issues can arise if your oil filter is clogged, damaged, or simply the wrong type:

Low Oil Pressure: A clogged filter restricts oil flow, leading to low oil pressure. This can trigger the low oil pressure warning light on your dashboard. Ignoring this warning can cause serious engine damage.
Engine Knocking or Ticking: Insufficient oil flow due to a blocked filter can cause engine parts to become starved of lubrication, resulting in knocking or ticking noises.
Dirty Oil: If the filter is failing to properly filter contaminants, your oil will become dirty much faster than normal. You might notice this by checking the oil dipstick – the oil should be a relatively clean amber color, not black and sludgy.
Oil Leaks: An improperly installed filter, a damaged gasket, or the wrong filter size can lead to oil leaks around the filter housing.
Reduced Engine Performance: A lack of proper lubrication can decrease engine efficiency, leading to reduced power and fuel economy.

Changing Your Oil Filter: A Step-by-Step Guide

Changing your oil and filter is a relatively straightforward DIY task, but it's important to follow the correct procedure to avoid problems. Here's a general guide:

Gather Your Supplies:
- New oil filter (Nissan 15208-65F0E or equivalent)
- New engine oil (check your owner's manual for the correct type and quantity)
- Oil filter wrench
- Wrench for the oil drain plug
- Drain pan
- Funnel
- Gloves
- Rags or shop towels
- Jack and jack stands (optional, but recommended for easier access)
Warm Up the Engine (Slightly): Run the engine for a few minutes to warm the oil, making it flow more easily. Be careful not to let it get too hot!
Secure the Vehicle: If you're using a jack, park the vehicle on a level surface, engage the parking brake, and chock the rear wheels. Jack up the front of the vehicle and securely support it with jack stands. Never work under a vehicle supported only by a jack!
Locate the Oil Drain Plug: The oil drain plug is typically located on the bottom of the oil pan. Place the drain pan underneath the drain plug.
Remove the Drain Plug: Use the correct size wrench to carefully loosen and remove the drain plug. Let the oil drain completely into the pan.
Remove the Old Oil Filter: Locate the oil filter (it's usually easily accessible from underneath the vehicle). Use the oil filter wrench to loosen and remove the old filter. Be prepared for some oil to spill, so have a rag handy.
Prepare the New Oil Filter: Lightly lubricate the rubber gasket on the new oil filter with fresh engine oil. This will help ensure a good seal.
Install the New Oil Filter: Screw the new oil filter onto the engine by hand until the gasket makes contact with the engine. Then, tighten it an additional ¾ to a full turn, as specified on the filter. Do not overtighten!
Reinstall the Drain Plug: Clean the drain plug and install a new crush washer (if applicable). Tighten the drain plug to the manufacturer's specified torque.
Lower the Vehicle: Carefully lower the vehicle back to the ground.
Add New Oil: Open the oil fill cap on top of the engine and carefully pour in the correct amount of new engine oil, using a funnel to prevent spills.
Check the Oil Level: Use the dipstick to check the oil level. Add more oil if necessary to reach the "full" mark.
Start the Engine: Start the engine and let it run for a few minutes. Check for any leaks around the oil filter and drain plug.
Turn Off the Engine and Recheck: Turn off the engine and let it sit for a few minutes. Recheck the oil level and add more oil if needed.
Dispose of Used Oil Properly: Take the used oil and filter to a recycling center or auto parts store for proper disposal.

Tools Needed

Oil filter wrench (specific size for your filter)
Wrench for the oil drain plug (usually 14mm or 17mm)
Socket set (for removing any underbody panels)
Drain pan
Funnel
Jack and jack stands (optional but recommended)
Gloves
Rags or shop towels

Estimated Costs

Here's a breakdown of the approximate costs involved:

Oil Filter: $5 - $20 (depending on brand and type)
Engine Oil: $30 - $70 (depending on type and quantity)
Oil Filter Wrench: $10 - $20
Drain Pan: $10 - $30

DIY Oil Change Cost: $45 - $120 (plus the cost of the jack and jack stands if you don't already own them).

Professional Oil Change Cost: Expect to pay anywhere from $75 to $150 or more for a professional oil change at a dealership or auto repair shop. This usually includes the cost of the oil, filter, and labor.

When to Consult a Professional

While changing your oil and filter is a manageable DIY task, there are situations where it's best to consult a professional:

If you're not comfortable working on your car. It's better to be safe than sorry.
If you have any doubts about the correct procedure. Incorrectly installing the filter or drain plug can lead to serious engine damage.
If you suspect there might be a more serious engine problem. If you're experiencing symptoms like excessive engine noise or low oil pressure, it's best to have a mechanic diagnose the issue.
If you live in an apartment or other location where you can't easily dispose of used oil.

By following these guidelines and using the correct oil filter for your 2021 Nissan Rogue, you can help ensure that your engine stays properly lubricated and protected for years to come. Remember to always consult your owner's manual for specific recommendations regarding oil type, filter type, and maintenance intervals. Happy motoring!